Soft Feel DTF Transfers & Tees
Gang Sheet Auto Builder - Custom DTF Transfers
Gang Sheet Auto Builder - Custom DTF Transfers
Create your own gang sheet with as many images as you can fit printed onto a roll of film. You pick the length. Gang sheets will arrive on a roll and individual images will need to be cut apart by you.
***We print these files exactly as submitted, no editing is done on our end so please proof your project before submitting! Any backgrounds, overlapping images, or other errors can't be fixed on our end and will be printed! Artwork should be 300dpi or higher for quality prints. Lower will result in poor print quality.
Each print is printed to order. Our standard TAT is 3-5 business days, unless otherwise stated on our website homepage announcement.
If you are needing your order sooner, we offer a "RUSH" option as well. For this please add the "RUSH" listing to your cart and checkout together.
-These DTF Transfers ship to you ready to press, and can be applied to all blends and colors of fabric, even leather.
Pressing instructions:
- Pre-press shirts for 8-10 seconds to remove any moisture
- Press transfer face down for 15 seconds at temperature recommended below depending on material setting.
*Cricut hand held presses and irons are not recommended as they don't have adequate pressure.
*Pressure 70psi or higher. (Med-High)
*Cotton: 300 - 320 degrees F
*Polyester, synthetics and blends: 260 - 275 degrees F
- Hot or Cold peel.
- Repress for 5 seconds with parchment paper or heavy cotton shirt over design to soften the feel and remove any shine.
FAQs:
![Gang Sheet Auto Builder - Custom DTF Transfers](http://madebymommacraftco.com/cdn/shop/files/autobuilder.png?v=1707933844&width=1445)